Products – Anmol Chemicals Private Limited
Polysorbate 80 JP
Abstract
Polysorbate 80 is derived from polyethoxylated sorbitan and oleic acid. The hydrophilic groups in this compound are polyethers also known as polyoxyethylene groups, which are polymers of ethylene oxide.
The full chemical names for polysorbate 80 are: Polyoxyethylene (80) sorbitan monooleate and (x)-sorbitan mono-9-octadecenoate poly(oxy-1,2-ethanediyl).
Use/Application
It is a nonionic surfactant and emulsifier often used in pharmaceuticals and chemical industries.
Identity:
Molecular Formula: C64H124O26
Molecular Weight: 2917 g/mol
EINECS EC Number: 500-019-9
CAS No : 9005-65-6
| Test | Specification…JP |
| Characters | It occurs as a colorless or brownish yellow, clear or slightly opalescent, oily liquid. |
| Identification
Test (A)
|
(a) It meets the requirements of the Composition of fatty acids. |
| Solubility | It is miscible with water, with methanol, with ethanol (99.5%) , with ethyl acetate and practically insoluble in fatty oils and in liquid paraffin. |
| Specific Gravity | About 1.10 |
| Viscosity | About 400 mPa.s at 25OC |
| Acid Value | Not more than 2.0% |
| Hydroxyl Value | Between 65 to 80 |
| Peroxide Value | Not more than 10 |
| Saponification Value | Between 45 to 55 |
| Composition of Fatty Acid
a) Myristic Acid b) Palmitic Acid c) Palmitoleic Acid d) Stearic Acid e) Oleic Acid f) Linoleic Acid g) Linolenic Acid |
Not more than 5.0% Not more than 16.0% Not more than 8.0% Not more than 6.0% Not more than 58.0% Not more than 18.0% Not more than 4.0% |
| Ethylene Oxide | Not more than 10 ppm |
| Residue on ignition | Not more than 0.25% |
| Water | Not more than 3.0% |
Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.
Other
We Manufacture Bulk Dugs/API, Excipients, pharmaceuticals (IP/BP/USP/NF/PH. EUR./JP), Speciality Chemicals (Pure/AR/ACS), mineral fortifiers (FCC). our manufacturing facility is GLP, GMP (FDA) approved, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, kosher, halal, COPP and WHO-GMP certified.
Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (EXCiPACT cGMP)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)
