Products – Anmol Chemicals Private Limited

Aluminum Chlorohydrate solution USP



Uses / Applications:


Chemical Name: Aluminium Chlorohydrate
Mol. Formula: AlnCl(3n-m)(OH)m
CAS No.: 12042-91-0



Test Specification……USP
Appearance It occurs as clear to yellow hazy liquid

Test A


Test B

Test C

Test D


  1. Meets the requirements of Aluminium and Chloride Tests
  2. Identification of propylene glycol
  3. Identification of dipropylene glycol
  4. Identification of Alcohol
Arsenic Not more than 2 ppm
Limit of Iron Not more than 75 ppm
pH Between 3.0 to 5.0
Residual Solvents Meets requirements

  1. Content for chloride




  1. Content of Aluminum




  1. Aluminum/Chloride Atomic Ratio
  2. Concentration



1. Each mL of 0.1 N silver nitrate is equivalent to 3.545 mg of chloride (Cl). Use the chloride content thus obtained to calculate the aluminum/chloride atomic ratio.

2. Each mL of 0.1 M Edetate disodium titrant consumed is equivalent to 2.698 mg of aluminum (Al). Use the aluminum content thus obtained to calculate the aluminum/chloride atomic ratio.

3. 1.91: 1 to 2.10: 1


4. 90.0%–110.0% of the concentration of

anhydrous aluminum chlorohydrate

Shelf life, Storage and Packing

It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.


We Manufacture Bulk Dugs/API, Excipients, pharmaceuticals (IP/BP/USP/NF/PH. EUR./JP), Speciality Chemicals (Pure/AR/ACS), mineral fortifiers (FCC). our manufacturing facility is GLP, GMP (FDA) approved, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, kosher, halal, COPP and WHO-GMP certified.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (EXCiPACT cGMP)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)