Products – Anmol Chemicals Private Limited

Aluminium Chlorohydrate Solution USP

Aluminum Chlorohydrate Solution consists of complex basic aluminum chloride. It appears as a clear colorless liquid.


It is mostly used in waste water treatment process. It is widely used in Chemical and Pharmaceutical Industries.


General Specifications

Test Specification
Appearance It occurs as clear to yellow hazy liquid

Test A

Test B

Test C

Test D


  1. Test for aluminium and Chloride
  2. Test for Propylene Glycol
  3. Test for Dipropylene Glycol
  4. Test for alcohol
Arsenic Not more than 2 ppm
Limit of Iron Not more than 75 ppm
pH 3.0–5.0
Residual Solvents Meets the requirements

1. Content for chloride




2. Content of Aluminum




3. Aluminum/Chloride Atomic Ratio


4. Concentration


1.Each mL of 0.1 N silver nitrate is equivalent to 3.545 mg of chloride (Cl). Use the chloride content thus obtained to calculate the aluminum/chloride atomic ratio.

2. Each mL of 0.1 M Edetate disodium titrant consumed is equivalent to 2.698 mg of aluminum (Al). Use the aluminum content thus obtained to calculate the aluminum/chloride atomic ratio.

3. 1.91: 1 to 2.10: 1


4. 90.0%–110.0% of the labeled concentration of anhydrous aluminum chlorohydrate



Shelf life, Storage and Packing

It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.


We Manufacture Bulk Dugs/API, Excipients, pharmaceuticals (IP/BP/USP/NF/PH. EUR./JP), Speciality Chemicals (Pure/AR/ACS), mineral fortifiers (FCC). our manufacturing facility is GLP, GMP (FDA) approved, ISO 9001, ISO 14001, ISO 22000, FSSC 22000, FSSAI, kosher, halal, COPP and WHO-GMP certified.

Good Manufacturing Practice Certified by World Health Organization (WHO-GMP)
Written Confirmation Certification (WC)
Good Manufacturing Practice (EXCiPACT cGMP)
Good Manufacturing Practice (cGMP)
Good Laboratory Practice (GLP)